• product name: Z3W5-3227
  • Product ID: cp42
  • Added time: 2015-06-05
  • Views : 38

In hydraulic transmission and PLC integrated control,the automatic shaper can finishing initial shaping of the inner diameter, outer diameter and end height of stator end coils only once after wire inserting.It's single controlled by every shaping step,achieving shaping of stator end coils respectively and setting sequency as required,with single-tooth slot insulation protective device to insert.Simultaneously for easy operation,equipped with auto driving and reversing mechanism for stator station,it's adaptable for intermediate shaping before stator end coil lacing.
Parameter  
Max.Stator Stack Height 65mm-315mm
Adaptation Stator Outer Dia. ф315
Adaptation Stator Inner Dia. ф200
Power Source Three-phase four-wire380V50Hz
Power 5KW
Tact Time 0.6-1MPa
Max.Shaping Force 40KN
Weight 3230kg
Dimension(L*W*H) 3200×2200×1450mm
“Note:We reserve the right to change technical specifications of products; the contents are not the basis of ordering and acceptance; specifications are subjected to change without further notice. ”

Key words :