• product name: Z3L5-2529
  • Product ID: cp24
  • Added time: 2015-04-07
  • Views : 58

With hydraulic transmission Electrical integrated control,the automatic shaper adopts the internal expanding and external collecting mechanism to shape the inner diameter, outer diameter and end height of stator end coils only once after wire inserting.It is used scaling mechanism for the coil excircle,at the same time,it adds single-tooth slot insulation protective device,stator driving and reversing mechanism,stator ejector. The machine is convenient for operation safety,it's adaptable for intermediate shaping before stator end coil lacing.
Parameter  
Stator Lamination Thickness 45-250mm
Min.Internal Diameter of Stator ф40mm
Power Source Three-phase four-wire380V50Hz
Power 4KW
Tact Time 30sec/set
Max Shaping Force 30kN
Weight 2780kg
Dimension(L*W*H) 2372*1480*3360 mm
“Note:We reserve the right to change technical specifications of products; the contents are not the basis of ordering and acceptance; specifications are subjected to change without further notice. ”

Key words :